IFM AL4033 handleiding
Handleiding
Je bekijkt pagina 23 van 61
Remote I/O module 16 DI AL4033
23
9.1.3 Configuring the device
The [Parameter] menu page provides access to the configuration options of the device.
The parameters can only be changed if the device is in one of the following ECAT operating
modes: PRE-OPERATIONAL, SAFE-OPERATIONAL
Requirements:
ü IoT Core Visualizer has been started.
u Select the [Parameter] menu.
w The menu page shows the available parameters of the device.
9.1.3.1 Configuring input filters
u Observe the notes on input filters: Digital input filters (Ò/8)
Available parameters:
Name Description Value range Access
[pin2] > [debounce_time] Pin 2: debounce time (= value * 0.1milli-
seconds)
• 0: 0ms (default)
…
• 500: 50 ms
rw
1
[pin2] > [hold_time] Pin 2: hold time (= value * 0.1milliseconds) • 0: 0ms (default)
…
• 60000: 6000 ms
rw
1
[pin2] > [hold_level] Pin 2: hold level • Low: hold LOW
• High: hold HIGH (default)
rw
1
[pin2] > [invert] Pin 2: inversion • Signal not inverted: do not invert
(default)
• Signal inverted: invert
rw
1
[pin4] > [debounce_time] Pin 4: debounce time (= value * 0.1milli-
seconds)
• 0: 0ms (default)
…
• 500: 50 ms
rw
1
Bekijk gratis de handleiding van IFM AL4033, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL4033 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3248 MB |
