IFM AL1430 handleiding
Handleiding
Je bekijkt pagina 37 van 78
IO-Link master with EtherCAT interface AL1430
37
9.2.3.7 Restricting the current intensity of the supply voltages US/UA
The following electrical properties can be set for ports X1...X4:
• Max. current intensity of the supply voltage US (pin 1 and pin 4)
• Max. current intensity of the supply voltage UA (pin 2)
Available parameters:
Name Description Value range Access
[current_us_max] Max. current intensity of the supply
voltage US on the port (value in milli-
amps)
• 0: 0 mA
…
• 450: 450 mA (default)
…
• 2000: 2000 mA
rw
1
[current_ua_max] Max. current intensity of the supply
voltage UA on the port (value in milli-
amps)
• 0: 0 mA (default)
…
• 2000: 2000 mA
rw
1
1
Read and write
Requirements:
ü IoT Core Visualizer has been started.
ü The [Parameter] menu is active.
u Select the [Iolinkmaster] > [port[x]] > [powercontrol] submenu (x: 1…4).
u Set the parameters.
u Click on to save the changes to the device.
w The current intensities of the supply voltages have been restricted.
9.2.3.8 Configuring device validation and data storage
The device supports the functions device validation and backup / restore of parameter data of the
connected IO-Link devices.
The following options are available:
Option
Validation of the connected
IO-Link device
Backup of parameter values
Restore of parameter val-
ues
[No check and clear] No No No
[Type compatible V1.0 de-
vice]
Yes, test compatibility with IO-
Link standard V1.0
No No
[Type compatible V1.1 de-
vice]
Yes, test compatibility with IO-
Link standard V1.1
No No
[Type compatible V1.1 de-
vice with Backup + Restore]
Yes, test compatibility with IO-
Link standard V1.1 and identity
of design (vendor ID, device
ID)
Yes, automatic backup of pa-
rameter values; Changes to
the current parameter values
will be stored
Yes, restore of parameter val-
ues when connecting an iden-
tical IO-Link device with facto-
ry settings
[Type compatible V1.1 de-
vice with Restore]
Yes, test compatibility with IO-
Link standard V1.1 and identity
of design (vendor ID, device
ID)
No, there is no automatic
backup; Changes to the pa-
rameter values are not stored
Yes, restore of parameter val-
ues when connecting an iden-
tical IO-Link device with facto-
ry settings
Device validation and backup / restore of parameter values are only available if the “IO-Link”
operating mode of the port has been activated.
For options [Type compatible V1.1 device with Backup + Restore] and [Type compatible V1.1
device with Restore]: If the parameters [Vendor ID] or [Device ID] are changed in online mode,
the data memory is deleted and the parameter values of the connected IO-Link device are
backed-up again in the IO-Link master.
Available parameters:
Bekijk gratis de handleiding van IFM AL1430, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL1430 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6448 MB |
