IFM AE3400 handleiding
Handleiding
Je bekijkt pagina 22 van 25
AE3400 IIoT controller
22
10 Maintenance, repair and disposal
The device is maintenance-free with the exception of battery replacement.
10.1 Battery change
If the system time is permanently incorrect after the device is turned on, the battery must be changed.
The battery is located behind the service cover, in the left-hand area.
1
2
1: Service cover
2: Battery
ATTENTION
The protection rating does not apply if the service cover is open and there is no ESD
protection of the accessible contacts inside.
w Damage to the device possible
u Clean the area around the service cover before opening it.
u Protect the inside of the device, sealing areas and sealing of the service cover from
soiling and humidity.
u When changing the battery, take ESD precautions.
u Check sealing areas and sealing for soiling. Clean them, if necessary.
To change the battery of the device:
u Disconnect the device from the voltage supply.
u Remove the service cover on the front of the device (width across flats 13 mm or ¼").
w Battery holder is visible.
u Remove battery and replace with new battery (battery type: CR1225). Observe the polarity when
inserting the new battery: positive side up
u Screw on the service cover (width across flats 13 mm or ¼", tightening torque: 3Nm).
w The new battery is active.
w Protection rating is restored.
u After changing the battery, reset the system time.
Disposal of used batteries: Disposal (Ò/23)
For the cULus scope of validity:
Bekijk gratis de handleiding van IFM AE3400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AE3400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1824 MB |
