IDIS NK-1200 handleiding
Handleiding
Je bekijkt pagina 18 van 45
Part 2 - Installation
18
Video Management System
Registration
You can register the video management system for
control via network connection. The video management
system can be controlled only in Advanced mode with
an aid of the IDIS Discovery program.
1
Connect the video management system to the
network.
2
Run the IDIS Discovery program and connect the
network keyboard for registration. Refer to IDIS
Discovery Operation Manual on the installation
CD provided with the network keyboard. for more
information about the IDIS Discovery program.
3
Select Setup > Remote Setup > Network > IP
Address.
Congure the network connection information.
4
Select Setup > Remote Setup > Device > General.
Select Advanced in Setup Type.
5
Select Setup > Remote Setup > Device > Setup.
5-1
Click Video Management System and click Add
for registration.
5-2
Congure the registration information and click
OK.
• ID: The network keyboard assigns the ID
automatically when the video management
system is registered, and you can change the
ID. The ID is used to distinguish the video
management system from others during control
with a network keyboard, so each must have a
unique ID.
• Connection: Select Ethernet and enter the IP
address, number of ports, user ID, and password
for connection to the video management
system.
Bekijk gratis de handleiding van IDIS NK-1200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IDIS |
| Model | NK-1200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4905 MB |
