IDIS NK-1200 handleiding
Handleiding
Je bekijkt pagina 11 van 45
Part 1 – Introduction
11
1 Speaker
Connect to an amplier (Line-out). The network
keyboard does not have the amplied audio output
so a speaker with an amplier is needed. Audio
surveillance may be prohibited by local laws that
vary by the region. Check the laws in your area before
using this product for surveillance purposes.
2 MIC
Connect to an audio source. (Line-in or Microphone)
3 USB Port
Connect a USB ash drive or USB mouse. You can
upgrade the software after connecting a USB ash
drive or you can control devices that are controlled
over a network by using a USB mouse. The USB
mouse is supported only for NVRs that provide the
function. See below for details about the software
upgrade.
4 Network Port
Connect a UTP Cat5 cable with an RJ-45 jack. For
more information about the network setup, see
Part 5 - Remote Setup and refer to IDIS Discovery
Operation Manual on the installation CD provided
with the network keyboard.
5 RS485 PTZ Port
Connect to PTZ cameras. Connect TX+/RX+ and TX-/
RX- of each PTZ camera to the + and – (respectively)
of the network keyboard. For RS485 conguration,
refer to the PTZ camera manufacturer’s manual.
RS485 PTZ Connector Pin Outs
Master Unit Slave Unit
+ → To → TX+/RX+
— → To → TX—/RX—
6 RS485 DVR Port
RS485 DVR port is not supported.
7 Power In
Connect the power adaptor provided with the
network keyboard. The network keyboard starts
booting as soon as power is applied.
8 Joystick Port
Connect a joystick cable. The joystick cable must be
connected while the network keyboard is o.
Software Upgrade
1
Copy the upgrade le to a USB ash drive.
2
Create a text le to contain only the upgrade le
name and its extension (.rui). Then save the text le
as autorun.txt on the ash drive
3
Connect the USB ash drive to the network
keyboard.
4
Enter into the LCD menu.
5
Select General > Upgrade. Selecting Ye s causes the
network keyboard to load the upgrade le named
in autorun.txt. Then the upgrade is performed
automatically. The network keyboard will restart.
6
The LCD default screen appears after nishing the
upgrade. If an error occurs during the software
upgrade, see Part 6 - Appendix > System Upgrade
Error Codes.
You can upgrade the software remotely by running the
IDIS Discovery program. For more information about
the remote software upgrade, refer to IDIS Discovery
Operation Manual on the installation CD provided with
the network keyboard.
Bekijk gratis de handleiding van IDIS NK-1200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IDIS |
| Model | NK-1200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4905 MB |
