IDIS DH-2010P handleiding
Handleiding
Je bekijkt pagina 13 van 22
13
Part 1 - Introduction
LED Status Indications
Mode Status Color Description
LA
(Link/Activity)
On Amber Normal network connection at 10/100/1000Mbps
Blinking Amber
Data transmission over the network in progress at
10/100/1000Mbps
O - No network connection or a problem with the connection
SPD (Speed)
On Green Normal network connection at 1000Mbps
O - No network connection or a problem with the connection
9 Reset Switch
The reset switch, which is located to the left of the Power LED button, is used to reset the
product's settings. Pressing the reset switch immediately reboots the product.
If the product does not reboot after pressing the switch, press and hold the switch for 5
seconds. You will need a straightened paper clip to press the reset switch.
0 PoE Max. LED
PoE Max. LED indicates PoE statuses.
LED Status Indications
Mode Status Color Description
PoE Max.
On Red
Power to the connected PoE-supported network camera
has reached maximum level allowed
Blinking Red
The room of PoE power that could be supplied to the RJ-45
service ports is not enough to ensure IEEE 802.3af 1 port
(15.4W)
O -
Normal to supply power to the PoE-supported network
cameras which are connected to the RJ-45 service ports.
! Power LED
Power LED indicates the system's power on/o status.
The LED lights up in red to indicate the system is powered on.
Bekijk gratis de handleiding van IDIS DH-2010P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IDIS |
| Model | DH-2010P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1425 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 1350 g |
| Breedte | 280 mm |
| Diepte | 180 mm |
| Hoogte | 44 mm |
