IDIS DH-2010P handleiding
Handleiding
Je bekijkt pagina 12 van 22
12
Part 1 - Introduction
LED Status Indications
Mode Status Color Description
L/A
(Link/Activity)
On Amber Normal network connection at 10/100Mbps
Blinking Amber
Data transmission over the network in progress at
10/100Mbps
O - No network connection or a problem with the connection
PoE
On Green
Connected and transmits power over the network normally to
an IEEE 802.3af PoE-supported network camera
O - Not connected to a PoE-supported network camera
3 RJ-45 Uplink Ports
RJ-45 uplink ports are used to connect the switch to a higher tier device. These ports are
useful when cascading multiple network devices.
• If not using for uplinking purposes, these ports can be used as service ports, but they do not
support PoE.
• Each port is enabled with Auto-MDI/MDI-X detection.
• The ports operate in dierent modes based on the network speed. (10/100Mbps: full/half
duplex, 1000Mbps: full duplex)
5 RJ-45 Uplink Port LEDs
These LEDs indicate the status of the RJ-45 uplink ports.
The LED color indicates connection and communications speeds with the connected device.
Bekijk gratis de handleiding van IDIS DH-2010P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IDIS |
| Model | DH-2010P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1425 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 1350 g |
| Breedte | 280 mm |
| Diepte | 180 mm |
| Hoogte | 44 mm |
