Icom IP1100CV handleiding
Handleiding
Je bekijkt pagina 7 van 83
1
BEFORE USING THE CONTROLLER
1-3
Panel description
■ Front panel
9<UPDATE> BUTTON ��� When [MSG] lights green, a firmware update is ready. Hold down this
button until [MSG] blinks green to update the firmware.
L Use a pin to push the button.
<INIT> BUTTON ����� Push to initialize the settings. See Section 3 for details.
L Use a pin to push the button.
<USB EJECT> BUTTON � When removing the USB flash drive, hold down this button until
[USB] (4) turns OFF.
[USB] PORT
(USB 3.0) �������� Connect a USB flash drive (user supplied) to save or restore settings or
to update the firmware.
L You can save the recorded audio on a data storage device through the USB
port. Only one storage device can be connected to the USB port at a time.
L Be sure to back up the data on the USB ash drive before connecting it to
the Controller.
L A USB ash drive, such as one with biometric authentication, or one with
password protection is not supported.
L Some USB devices may not be usable with the IP1100CV.
[CONSOLE] PORT
(USB Type-C) ������ Connect a USB (Type-C) cable (user supplied) to remotely configure
the Controller from a PC using a terminal software (user supplied.)
About the USB driver
To use the [CONSOLE] port, the USB driver for the Icom network
devices is required.
Download the USB driver from the Icom website and install it on your
PC.
https://www.icomjapan.com/support/
1 8 9 234567
Bekijk gratis de handleiding van Icom IP1100CV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IP1100CV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9942 MB |
