Icom ID-52E PLUS handleiding
Handleiding
Je bekijkt pagina 28 van 88
3
BASIC OPERATION
15
BASIC MANUAL
■ Selecting the operating band
1. Push [VFO/MHz] to select the VFO mode.
2. Push [QUICK].
3. Select “Band Select.”
4. Select the desired frequency band.
• Sets the operating band, then returns to the standby
screen.
L Selectable frequency bands dier, depending on the
transceiver version. See the specications for details.
(p. 34)
■ Selecting the operating mode
The transceiver has 5 operating modes, FM, FM-N, AM,
AM-N, and DV.
z Push [MODE] to select the operating mode.
L Information
• In the FM-N mode, the TX modulation is automatically set to
narrow (approximately ±2.5 kHz).
• The AM-N mode can be used for only 108.000 MHz ~
143.995 MHz.
• On 108.000 MHz ~ 136.991 MHz, you can use only AM or
AM-N.
• On the Ham band, you can use only FM, FM-N, or DV.
• When the GPS TX mode is selected in the DV mode,
is
displayed.
([MENU] > GPS > GPS TX Mode)
TIP: You can make a simplex call not only in the FM
mode but also in the DV mode.
FM mode
Transmit and receive Receive only
Bekijk gratis de handleiding van Icom ID-52E PLUS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | ID-52E PLUS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9741 MB |
