Icom ID-52E PLUS handleiding
Handleiding
Je bekijkt pagina 27 van 88

BASIC OPERATION
3
14
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
BASIC MANUAL
■ Selecting the Frequency Selecting mode
D VFO mode
Rotate [DIAL] to set an operating frequency.
L In the VFO mode, is displayed.
D Memory mode
Select a Memory channel where an operating frequency and other parameters are saved.
L In the Memory mode, and the Memory Channel number are displayed.
D Call Channel mode
Select a Call Channel to recall your most-often used frequencies quickly.
L In the Call Channel mode, and the Call Channel number are displayed.
D Weather Channel mode (For only the ID-52A PLUS)
Weather Channels are used for monitoring Weather Channels from the National
Oceanographic and Atmospheric Administration (NOAA) broadcasts.
L In the Weather Channel mode, is displayed.
1. Select a mode.
L Information
• Push [VFO/MHz] to select the VFO mode.
• In the VFO mode, push [VFO/MHz] to select the 1 MHz tuning step.
• Push [MR] to select the Memory mode.
• Hold down [CALL] for 1 second to select the Call Channel mode.
• For only the ID-52A PLUS, push [MR] in the Memory mode to select the Weather
Channel mode.
2. Rotate [DIAL] to select an operating frequency or a channel.
VFO mode
Call Channel
mode
Weather Channel
mode
Memory mode
■ DR function operation
Using the D-STAR Repeater (DR) function, you can easily
select the entered repeaters and Your call signs by rotating
[DIAL]. You can make not only a repeater call but also a
simplex call.
z Hold down [DR] for 1 second.
• Displays the DR screen.
L Hold down [DR] again to cancel the DR function.
L See D-STAR GUIDE (p. 40) for the DR function
details.
Bekijk gratis de handleiding van Icom ID-52E PLUS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Icom |
Model | ID-52E PLUS |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 9741 MB |