Icom ID-52E PLUS handleiding
Handleiding
Je bekijkt pagina 25 van 88
BASIC OPERATION
3
12
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
BASIC MANUAL
■ Monitor function
The Monitor function is used to listen to weak signals
without changing the squelch setting.
z While holding down [SQL], you can hear weak signals
on the frequency.
TIP: You can set the Monitor Hold function on the MENU
screen. The transceiver opens or closes the squelch
each time you push [SQL].
([MENU] > SET > Function > Monitor)
■ Setting a squelch level
Noise squelch enables the audio to be heard only while
receiving a signal that is stronger than the set level. A
higher level blocks weak signals, which enables you to
receive only stronger signals. A lower level enables you to
hear weak signals.
L Throughout this document, “Noise squelch” is simply called
“Squelch.”
z While holding down [SQL], rotate [DIAL] to select the
squelch level.
L Information
• Options: “OPEN,” “AUTO” (default), and “LEVEL 1” ~
“LEVEL 9”
• “LEVEL 1” is loose squelch (for weak signals) and
“LEVEL 9” is tight squelch (for strong signals).
• “AUTO” is an automatic level adjustment using a noise pulse
counting system.
• “OPEN” is the continuously open setting.
• In the DV mode, you cannot set the squelch to “OPEN.”
Automatic squelch
Maximum squelch level
The rst segment
blinks.
Bekijk gratis de handleiding van Icom ID-52E PLUS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | ID-52E PLUS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9741 MB |
