Icom ID-52E PLUS handleiding
Handleiding
Je bekijkt pagina 24 van 88
11
BASIC MANUAL
3
BASIC OPERATION
■ Receiving
The following are basic settings for receiving.
• Setting the Dualwatch function. (p. 11)
• Selecting the Frequency Selecting mode. (p. 14)
• Selecting the operating band. (p. 15)
• Selecting the operating mode. (p. 15)
• Setting a frequency. (p. 16)
• Setting a squelch level. (p. 12)
■ Dualwatch operation
The Dualwatch function simultaneously monitors 2
frequencies. The ID-52A PLUS/ID-52E PLUS has 2
independent receiver circuits, A band and B band.
You can set dierent frequencies or operating modes
in each band.
L Selectable frequency diers, depending on the
transceiver version and the A/B bands. See the
specications for details. (p. 34)
L When the Dualwatch function is ON, the audio output
may be interrupted when the frequency is switched
while scanning, or by other factors.
D Turning Dualwatch ON or OFF
z Hold down [DUAL] for 1 second to turn the Dualwatch
function ON or OFF.
• When the Dualwatch function is ON, the display shows
the A band in the upper half and the B band in the lower
half of the display.
L “MAIN” is displayed on the MAIN band, where you can
change the settings.
L The SUB band can be automatically muted.
([MENU] > SET > Sounds > Sub Band Mute)
• When the Dualwatch function is OFF, the display shows
only the MAIN band. Push [MAIN] to select the A or B
band.
L On the B band, if you select a memory channel that
is out of the selectable frequency range, “
” is
displayed, and the signal cannot be received.
D MAIN band selection
z Push [MAIN] to alternately set the A band or B band as
the MAIN band.
• “MAIN” is displayed on the MAIN band, where you can
change the settings.
L Band selection, receive frequency setting, receive mode
selection, Memory channel selection, the Memory Write
operation, the Band Scope operation can be made only
on the MAIN band.
Dual band display
(The Dualwatch function is ON)
A
band
B
band
B band is set as
the MAIN band.
Single band display
(The Dualwatch function is OFF)
B band is out of the
selectable frequency range.
Bekijk gratis de handleiding van Icom ID-52E PLUS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | ID-52E PLUS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9741 MB |
