Icom ID-52E PLUS handleiding
Handleiding
Je bekijkt pagina 15 van 88
PANEL DESCRIPTION
1
2
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
BASIC MANUAL
ENTER KEY [ENT]
Push to set the selected item or option.
DR • D-PAD (DOWN) KEY
[DR]/D-pad()
z Hold down for 1 second to turn the
DR function ON or OFF. (p. 14)
z In the DR screen, MENU screen, or
Quick Menu window, push to move
the option or value selector bar
down. (pp. 13, 21, 49)
QUICK MENU • SPEECH KEY
[QUICK]/[SPCH]
z Push to open the Quick Menu
window. (p. 13)
z Hold down for 1 second to audibly
announce the displayed frequency
and operating mode, or call sign.
(p. 17)
MEMORY • SELECT MEMORY WRITE
KEY [MR]/[MW]
z Push to enter the Memory mode.
(p. 14)
L For the ID-52A PLUS only
In the Memory mode, push once to
enter the Weather Channel mode.
z Hold down for 1 second to open the
Select Memory Write window.
(p. 23)
z Hold down for 3 second to enter the
Memory channel contents to a blank
channel.
VFO/MHz • CLEAR • CALL KEY
[VFO/MHz]/[CLR]/[CALL]
z Push to enter the VFO mode.
(p. 16)
z In the VFO mode, push to select 1
MHz tuning steps. (p. 16)
z In the MENU screen, push to select
an upper-tier menu. (p. 21)
z Push to delete an entered character.
(p. 46)
z Hold down for 1 second to enter the
Call Channel mode. (p. 14)
LO • D-PAD (RIGHT) KEY
[LO]/D-pad()
z Hold down for 1 second to open the
Select Output Power window.
(p. 19)
z In the MENU screen, push to select
a lower-tier menu. (p. 21)
RX CALL SIGN CAPTURE • D-PAD
(UP) KEY [RX→CS]/D-pad()
z In the DR screen, MENU screen, or
Quick Menu window, push to move
the value or option selector bar up.
(pp. 13, 21, 49)
z Hold down for 1 second to capture the
calling stationʼs call sign. (p. 55)
VOLUME CONTROL [VOL]
Rotate to adjust the audio level.
(p. 7)
CONTROL DIAL [DIAL]
z Rotate to select an operating
frequency. (p. 16)
z In the Memory mode, rotate to select
a Memory channel.
z Rotate to select a setting item or
value.
z In the Character Entry mode, rotate
to enter characters.
EXTERNAL MICROPHONE •
SPEAKER JACK [MIC/SP]
Connect an optional speaker
microphone or headset.
(SP: 3.5 mm (1/8 inch), MIC: 2.5 mm)
L Conrm that the transceiver is OFF
before connecting or disconnecting
optional equipment.
USB PORT (Type-C) [USB]
Connects to an external power source,
a PC, or other USB device.
EXTERNAL DC IN JACK [DC IN]
Connects to an optional battery charger
to charge the attached battery pack.
Bekijk gratis de handleiding van Icom ID-52E PLUS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | ID-52E PLUS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9741 MB |
