Icom IC-U20SR handleiding
Handleiding
Je bekijkt pagina 8 van 96
7
2
PANEL DESCRIPTION
BASIC MANUAL
■ Function display
1TX ICON
Displayed while transmitting.
2ANTENNA ICON
z Displayed while the channel is busy
(receiving).
z Blinks while the monitor function is
turned ON.
3SIGNAL STRENGTH INDICATOR
Displays the relative receive signal
strength level.
4SCAN ICON
z Displayed when the channel is
selected as a scan target channel.
z Blinks while scanning.
5VOX ICON
Displayed when the VOX function is ON.
6KEY LOCK ICON
Displayed when the Key Lock function is
ON.
7BATTERY INDICATOR
z Blinks while charging.
z Displays the remaining battery
charge.
Indication
*
Battery
Status
Full Mid
Charging
required
Battery
exhausted
* Blinks when the battery charge
decreases to a set level.
8ALPHANUMERIC READOUT
Displays messages such as channel
number.
CAUTION: DO NOT use the transceiver
without the connector covers or the
optional equipment attached.
The transceiver meets IP54 requirements
for dust-tight and splash resistance only
when the connector covers or the optional
HM-183LS is attached.
1 2 3 4 5 6 7
8
Factory default key assignment
[Side]
z Push to make a Smart-Ring call.
z Hold down to make a Call-Ring call.
[Top]
z Hold down for 2 seconds to enter the Emergency mode.
z Hold down for 1 second to exit the Emergency mode.
NOTE: If a user holds down [Emergency] for the Emer SW OFF Timer set
time before the Reminder Timer expires, the Emergency mode is canceled.
Bekijk gratis de handleiding van Icom IC-U20SR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-U20SR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10469 MB |
