Icom IC-T10 handleiding
Handleiding
Je bekijkt pagina 38 van 48
6
OTHER FUNCTIONS
6-7
Using the Tone scan function
The Tone Scan function detects the subaudible tone
frequency and DTCS code in a received signal� By
monitoring a signal transmitted on a repeater input
frequency, you can determine the tone frequency
required to access the repeater�
Step.1 Turning ON the Tone scan function
1� Push [SET] to enter the Set mode�
• A Set mode item is displayed�
2� Repeatedly push [SET] to select “t SCAn�”
3� Rotate [DIAL] to select “On�”
4� Push [V/M/C] to exit the Set mode�
Step.2 Using the Tone scan function
z Hold down [SCAN] until a beep sounds to start the
scan�
L The transceiver slowly scans while receiving, rapidly
scans while no signal is received�
L When the tone frequency or DTCS code is received,
the transceiver overwrites the Set mode contents (tone
frequency or DTCS code) by the received one, and
then continues scanning�
L The transceiver automatically disables the Pocket
Beep function, if you start scanning with the function is
turned ON�
Tone scan
DTCS code scan
Bekijk gratis de handleiding van Icom IC-T10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-T10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4629 MB |
