Icom IC-T10 handleiding
Handleiding
Je bekijkt pagina 36 van 48
6
OTHER FUNCTIONS
6-5
Tone squelch operation
The tone squelch opens only when you receive a
signal that includes a matching subaudible tone in the
FM or FM narrow (FM-N) mode� You can silently wait
for calls from other stations using the same tone�
Also, the reversed tone squelch function mutes the
squelch when a signal includes a matching subaudible
tone�
Step. 1 Setting the tone squelch frequency
1� Repeatedly push [V/M/C] to select the VFO mode�
2� Hold down [MODE] until two beeps sound to
select an operating mode�
3� Set an operating frequency�
4� Push [SET]�
5� Repeatedly push [SET] to select “C tOnE�”
6� Rotate [DIAL] to set the tone squelch frequency�
7� Push [V/M/C] to exit the Set mode�
Step. 2 Using the tone squelch
1� Push [SET]�
2� Repeatedly push [SET] to select “tOnE�”
3� Rotate [DIAL] to select a tone squelch type�
4� Operate normally�
L You will only hear the audio of stations using the
same Tone Squelch frequency� All other signals will
be muted�
Tone squelch types indication
Reverse Tone Squelch
CTCSS Pocket Beep
Tone squelch
Repeater tone (Example)
TIP: Using the Pocket Beep function
When the transceiver receives a signal, a beep
sounds for 30 seconds and “ ” blinks�
L Confirm “P bEEP” is selected in the Set mode� (p� 5-3)
Bekijk gratis de handleiding van Icom IC-T10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-T10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4629 MB |
