Icom IC-T10 handleiding
Handleiding
Je bekijkt pagina 15 van 48
3
SCAN OPERATION
3-3
About Scans
D [DIAL] operation during a scan
z Rotate [DIAL] to change the scan direction during a
scan�
z Rotate [DIAL] to resume the scan when the scan is
paused�
D Squelch setting for a scan
You can change the squelch level to suit your
operating needs� Set the squelch level to open the
squelch, according to the received signal strength�
L Rotate [DIAL] while holding down [MONI] to adjust the
squelch level during a scan� The scan resumes after
releasing [MONI]�
D Tuning step for a VFO scan
The tuning step selected in the Set mode (p� 5-4) is
applied to the scan�
D Scan Skip function
The skip function speeds up scanning by not scanning
those frequencies set as skip channels (p� 3-5)�
In the VFO mode:
Skips the frequency assigned as “ ” (p� 3-5)�
In the Memory mode:
Skips the memory channel assigned as “ ” or
“ ” (p� 3-5)�
TIP: Turn OFF the Program Skip function in the Set
mode (p� 5-4) to execute a scan, including the
skipped frequency�
D Operating mode during a scan
• The VFO scan uses the selected operating mode�
• During a Memory mode scan, the operating mode
entered into the channel is used�
D When a signal is received
When a signal is received, the scan pauses for the
period of time that is set in the Set mode� (p� 5-4)
When a received signal disappears, the scan resumes
after the set period of time�
Bekijk gratis de handleiding van Icom IC-T10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-T10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4629 MB |
