Icom IC-FR5300 handleiding
Handleiding
Je bekijkt pagina 3 van 21
ii
PRECAUTIONS
R WARNING HIGH RF VOLTAGE! NEVER touch
an antenna or antenna connector while transmitting.
This could cause an electrical shock or burn.
R WARNING HIGH RF VOLTAGE! NEVER install
the antenna at any place that person easily touch the
antenna while transmitting. This could cause an elec-
trical shock or burn.
R WARNING! NEVER apply AC power to the DC
power receptacle on the repeater rear panel. This
could cause a re or damage the repeater.
R WARNING! NEVER apply more than 16 V DC to
the DC power receptacle on the repeater rear panel.
This could cause a re or damage the repeater.
R WARNING! NEVER remove the fuse holder on the
DC power receptacle on the repeater rear panel. Ex-
cessive current caused by a short could cause a re
or damage the repeater.
R WARNING! NEVER reverse the DC power cable
polarity. This could cause a re or damage the re-
peater.
R WARNING! NEVER let metal, wire or other objects
contact the inside of the repeater, or make incorrect
contact with connectors on the rear panel. This could
cause an electric shock or damage the repeater.
R WARNING! NEVER operate or touch the repeater
with wet hands. This could cause an electric shock or
damage to the repeater.
R WARNING! NEVER operate the repeater if you
notice an abnormal odor, sound or smoke. Imme-
diately turn OFF the power and/or remove the DC
power cable. Contact your Icom dealer or distributor
for advice.
R WARNING! NEVER put the repeater on an un-
stable place where the repeater may suddenly move
or fall. This could cause an injury or damage the re-
peater.
CAUTION: DO NOT expose the repeater to rain,
snow or any liquids. They could damage the repeater.
CAUTION: DO NOT use or leave the repeater in
areas with temperatures below –25°C (–13°F) or
above +55°C (+131°F): European or Australian
versions, below –30°C (–22°F) or above +60°C
(+140°F): other versions. Be aware that temperatures
can exceed 80°C (+176°F), resulting in permanent
damage to the repeater if left there for extended pe-
riods.
CAUTION: DO NOT place or leave the repeater in
excessively dusty environments. This could damage
the repeater.
CAUTION: DO NOT use harsh solvents such as ben-
zine or alcohol when cleaning. This could damage the
repeater surfaces. If the surface becomes dusty or
dirty, wipe it clean with a soft, dry cloth.
CAUTION: DO NOT put anything on top of the re-
peater. This will obstruct heat dissipation.
CAUTION: DO NOT use non-Icom microphones.
Other manufacturer’s microphones may have dier-
ent pin assignments, and could damage the connec-
tor and/or the repeater.
BE CAREFUL! The heatsink will become hot when
continuously transmitting the repeater for long peri-
ods of time.
NEVER leave the repeater in an insecure place to
avoid use by unauthorized persons.
For European versions
CAUTION: Hot surfaces. DO NOT touch
the repeater’s surface after continuously
transmitting for long periods of time. The
repeater’s chassis radiates heat, and it will become
hot to protect the power amplier unit from
overheating. Touching it may cause a burn.
Bekijk gratis de handleiding van Icom IC-FR5300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-FR5300 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2740 MB |
Caratteristiche Prodotto
| Ingebouwd display | Ja |
| Vermogensverbruik (max) | 50 W |
| Ondersteunde beveiligingsalgoritmen | SNMP |
| Rack-montage | Ja |
| Aantal kanalen | 32 kanalen |
