Icom IC-A25CE handleiding
Handleiding
Je bekijkt pagina 17 van 53
5
VOR NAVIGATION
5-2
Keys used for
Navigation Function
The IC-A25N and IC-A25NE have the keys shown
below to use the VOR Navigation function and
Waypoint Navigation function.
z Push [F], and then push these keys to use the
functions shown below.
L See section 6 for Waypoint Navigation function’s details.
q OMNI BEARING SELECTOR [1]/[OBS]
Push to enter the Omni Bearing Selector (OBS)
mode, to set the course heading.
w TO/FROM SELECTOR KEY [2]/[TO FROM]
Push to change the “TO/FROM” indicator and
invert the OBS setting on the Course Deviation
Indicator (CDI) screen.
e WAYPOINT NAVIGATION KEY [4]/[WPT NAV]
Push to display the Waypoint Navigation screen.*
*Onlywhenawaypointoraightplanisselected.
r DIRECT-TO KEY [5]/[ ]
Push to display the “Direct-To WPT” screen, to
enter a waypoint.
t FLIGHT PLAN KEY [6]/[FPL]
Pushtodisplaythecurrentightplan.*
*Onlywhenaightplanisselected.
q
e
w
t
r
Course Deviation Indicator
(CDI) screen
The transceiver displays the CDI screen when the
NAV band frequency is selected.
q
w
e
r
t
y
q COMPASS ROSE
w COURSE DEVIATION NEEDLE
Displayed when a VOR signal is received.
e DEVIATION MARKS
r OBS VALUE INDICATOR
Displays the course heading.
t VOR VALUE INDICATOR
Displays the heading to or from a VOR.
y TO/FROM INDICATOR
Using the Omni Bearing
Selector (OBS)
Use the Omni Bearing Selector, as shown below, to
set the course heading.
1. Push [F], and then push [OBS] to enter the OBS
mode.
• The OBS value is highlighted.
2. Rotate [DIAL], or push keypad keys to set the
course heading.
3. Push [ENT] to save the adjusted course heading.
Bekijk gratis de handleiding van Icom IC-A25CE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-A25CE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5600 MB |
