Icom IC-7760 handleiding
Handleiding
Je bekijkt pagina 73 van 100
8-16
BASIC MANUAL
SET MODE
8
8
MENU
»
SET > Network >
Controller Connection (via LAN) >
Audio Buer
Wired LAN (in Same Segment) (Default: 1.5ms)
Wired LAN (from Dierent Segment)
(Default: 2.5ms)
Wired LAN (via Internet) (Default: 30ms)
Includes Wireless LAN (Default: 150ms)
L When “The Route includes Wireless LAN” is set to “ON,”
only “Includes Wireless LAN” is valid, regardless of the
“Connection Route” setting.
L When “Connection Route” is set to “LAN (in Same
Segment),” only “Wired LAN (in Same Segment)” is valid.
L When “Connection Route” is set to “LAN (from Dierent
Segment),” “LAN (by on Controller Port FWD),” or “LAN
(by on RF Deck Port FWD),” only “Wired LAN (from
Dierent Segment)” is valid.
L When “Connection Route” is set to “Internet (by on Both
sides Port FWD),” “Internet (by on Controller Port FWD),”
“Internet (L2 VPN in Same Segment),” “Internet (L3 VPN
from Di Segment),” or “Internet (with Static IP Address),”
only “Wired LAN (via Internet)” is valid.
Selects the audio buer length to reduce audio
interruptions.
TIP: If the received audio is intermittent, select a
longer value.
Audio Retransmission (Default: ON)
L This item is valid only when:
• “Connection Route” is set to “Internet (by on Both sides
Port FWD),” “Internet (by on Controller Port FWD),”
“Internet (L2 VPN in Same Segment),” “Internet (L3
VPN from Di Segment),” or “Internet (with Static IP
Address).”
• “The Route includes Wireless LAN” is set to “ON.”
If there are lost packets in the audio communication
between the controller and the RF deck, select
whether or not to retransmit the lost packets.
Network Activity
Displays the packet round trip time and the packet
loss rate.
L They are not displayed when:
• The controller is not connected to the RF deck.
• The controller and RF deck are directly connected with
the supplied control cable.
L “Up” is the data transmission from the controller to the RF
deck, and “Dn” is from the RF deck to the controller.
MENU
»
SET > Network
Network Name
If you are operating the IC-7760 using the optional
RS-BA1, enter a network name of up to 15 characters.
MENU
»
SET > Network > Remote Settings
Network Control* (Default: OFF)
Selects whether or not to remotely control the
IC-7760.
• OFF: Disables remote control of the IC-7760.
• ON: Enables remote control of the IC-7760.
Power OFF Setting (for Remote Control)
(Default: Only Shutdown)
Selects whether or not to display the Standby/Shutdown
option dialog after holding down
POWER
for 1 second.
• Only Shutdown: Shuts down the transceiver when
you turn it OFF.
• Standby/Shutdown:
Displays the Standby/Shutdown
option dialog when you turn it OFF.
L When in the Standby mode, the indicator on
POWER
blinks orange.
Control Port (UDP)* (Default: 50001)
Sets a port number for the control signal transfers
between the IC-7760 and the remote station, when
you remotely control the IC-7760.
Serial Port (UDP)* (Default: 50002)
Sets a port number for the serial data transfers
between the IC-7760 and the remote station, when
you remotely control the IC-7760.
Audio Port (UDP)* (Default: 50003)
Sets a port number for the audio signal transfers
between the IC-7760 and the remote station, when
you remotely control the IC-7760.
Internet Access Line* (Default: FTTH)
Selects the Internet access line setting for the IP
remote control.
Bekijk gratis de handleiding van Icom IC-7760, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-7760 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18538 MB |
