Icom IC-7760 handleiding
Handleiding
Je bekijkt pagina 65 van 100
8-8
BASIC MANUAL
SET MODE
8
8
The assignable key functions for MIC Key:
Function Description
--- No function
UP
Push to increase the frequency (in 50 Hz
steps*) or Memory channel.
* When the Tuning Step function is ON,
increases the frequency in the selected
Tuning Step.
DOWN
Push to decrease the frequency (in 50 Hz
steps*) or Memory channel
* When the Tuning Step function is ON,
increases the frequency in the selected
Tuning Step.
UP
(VFO: kHz)
Push to increase the frequency (in the
selected Tuning Step) or Memory channel.
DOWN
(VFO: kHz)
Push to decrease the frequency (in the
selected Tuning Step) or Memory channel.
XFC Hold down for 1 second to monitor signals.
VFO/MEMO
• Push to select the VFO mode and the
Memory mode.
• Hold down for 1 second to copy the
Memory channel contents to the VFO.
BAND UP
• Push to increase an operating band.
• Hold down for 1 second to recall the
Band Stacking Register contents.
BAND DOWN
• Push to decrease an operating band.
• Hold down for 1 second to recall the
Band Stacking Register contents.
SPEECH
Push to announce the S-meter level,
frequency, and operating mode.
L The announced information depends on
the settings.
MODE
• Push to select the operating mode.
• Hold down to toggle USB and LSB, CW
and CW-R, RTTY and RTTY-R, or PSK
and PSK-R.
Function Description
Voice/Keyer/
RTTY/PSK
Memory 1
In the SSB, AM, or FM mode
• Push to transmit the voice audio
recorded on the SD card once.
• Hold down for 1 second to repeatedly
transmit the voice audio.
LIf the voice audio is not saved in the Voice TX
memory (T1 ~ T4), this function is disabled.
In the CW mode
• Push to transmit the Keyer memory
content once.
• Hold down for 1 second to repeatedly
transmit the memory content.
LIf the Keyer memory content (M1 ~ M4) is not
entered, this function is disabled.
In the RTTY mode
Push to transmit the RTTY memory
content once.
LIf the RTTY memory content (RT1 ~ RT4) is
not entered, this function is disabled.
In the PSK mode
Push to transmit the PSK memory content
once.
LIf the PSK memory content (PT1 ~ PT4) is
not entered, this function is disabled.
Voice/Keyer/
RTTY/PSK
Memory 2
Voice/Keyer/
RTTY/PSK
Memory 3
Voice/Keyer/
RTTY/PSK
Memory 4
TS
• Push to turn the Tuning Step function
ON or OFF.
• Hold down for 1 second to open the TS
screen.
MPAD
• Push to sequentially call up the
contents in the Memo Pads.
• Hold down for 1 second to save the
displayed contents into the Memo Pad.
SPLIT
• Push to turn the Split function ON or
OFF.
• Hold down for 1 second to turn ON the
Quick Split function.
CHANGE
• Push to toggle the frequency, mode,
and selected memory channel between
the Main and Sub band.
• Hold down for 1 second to copy the
Main band settings to the Sub band.
TUNER
• Push to turn the antenna tuner ON or
OFF.
• While the indicator on
TUNER
blinks
red, hold down for 1 second to start
manual tuning.
Bekijk gratis de handleiding van Icom IC-7760, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-7760 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18538 MB |
