Icom IC-7760 handleiding
Handleiding
Je bekijkt pagina 53 van 100
6-2
BASIC MANUAL
SD CARD/USB FLASH DRIVE
6
6
Formatting
Before using an SD card or USB ash drive, format it
to be used with the transceiver by doing the following
steps.
1. Open the SD CARD or USB FLASH DRIVE
screen.
MENU
»
SET > SD Card
MENU
»
SET > USB Flash Drive
2. Touch “Format.” (Example: SD CARD)
3. Touch [YES] to start formatting.
• After formatting, returns to the SD CARD or USB
FLASH DRIVE screen.
L To cancel formatting, touch [NO].
4. To close the SD CARD or USB FLASH DRIVE
screen, push
EXIT
several times.
Unmounting
Before you remove a card when the transceiver is ON,
be sure to electrically unmount it, as shown below.
Otherwise, the data may be corrupted or deleted.
1. Open the SD CARD or USB FLASH DRIVE
screen.
MENU
»
SET > SD Card
MENU
»
SET > USB Flash Drive
2. Touch “Unmount.” (Example: SD CARD)
3. Touch [YES] to unmount.
• After unmounting, returns to the SD CARD or USB
FLASH DRIVE screen.
L To cancel unmounting, touch [NO].
4. Remove the card from the controller.
• Push in the card until a ‘click’ sounds to unlock the
card, and then pull it out.
2Pull out
5. To close the SD CARD or USB FLASH DRIVE
screen, push
EXIT
several times.
When the transceiver is OFF
You can remove the card starting from step 4 of the
steps described above.
1Push in
Remove
Turns OFF
Controller
(front panel)
Controller (rear panel)
Bekijk gratis de handleiding van Icom IC-7760, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Icom |
| Model | IC-7760 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18538 MB |
