Ibiza Sound SCAN2000RGB handleiding
Handleiding
Je bekijkt pagina 6 van 28
MANUAL - SCAN Laser Systems
6
©Copyright LOTRONIC 2021
• ILDA console mode: ILDA signal input, output ILDA eect (only SCAN110RGB & SCAN2000RGB).
Eects library: Each eect library is stored as a sequence on the motherboard, they are:
1. Geometric sequence (Gypsophalange filter);
2. Wedding theme sequence;
3. Christmas theme sequence;
4. Beam sequence (no filter);
5. Geometric sequence (Galaxy Nebula);
6. 3D sequence (3D filter);
7. Point circle sequence (dot circle filter);
8. Long virtual point sequence (long virtual point filter);
LED DISPLAY INSTRUCTION:
{INTR}{DMX}{APP}{SET}{SND}{SEL} for status identication.
• {INTR} Indicates that the xture is using the built-in eect. When the status ag is lit (INTR} alone, it is the
built-in eect play mode.
• {DMX} indicates that the xture is controlled by the DMX signal. The status ag is only bright (DMX) for the
standard DMX control mode
• {INTR} {DMX} is a simple DMX mode that calls the built-in scenario via DMX signals.
• {SET} indicates that the xture is in the system setup state.
• {SND} indicates that the motion of the pattern is controlled by the sound when the xture is in the built-in
mode.
• {SEL} In the set state, the indicator is lit to indicate that the current setting option is enabled.
{INTR} the state of the digital display section
• {AL} indicates the mix mode in the built-in mode (the scene play is extracted from each sequence).
• {P ###} Indicates the scene playback mode when the built-in mode is displayed. The displayed value is the
scene number.
• {SE ##} indicates the sequence playback mode when the built-in mode is displayed, and the displayed value
is the sequence number.
{DMX} the digital display part state.
{INTR} + {DMX}the digital display part state.
• {A ###} Indicates the DMX address code for the xture.
{SET} the digital display part state.
• {SE ##} Indicates whether the digital display sequence is selected when the mixed mode of the built-in mode
is used.
(Note: {SEL} status ag indicates whether the sequence is selected.)
• {DR- ||} indicates the X mirror setting.
• {DR- =} represents the Y mirror setting.
• {DR- = ||} represents XY oset.
• {x ###} represents the X projection amplitude, the digital part is the full scale percentage value
(Note: {SEL} can be adjusted through the button on the board).
• {y ###} denotes the Y projection amplitude (Note: same as above).
• {r0FF} Indicates whether or not the remote control function is turned o.
The virtual remote control of the mobile phone APP is the same as that described in the previous section.
Extinguished: After a few hours of no operation, the digital part of the display will go out (Note: the screen func
-
tion with the specic model, some models do not have the function)
REMOTE CONTROL
Please operate the remote control within a distance of 6m and 30° between the remote and the appliance. Aim
the remote at the sensor. Remove all obstacles between the remote and the sensor.
The remote control might not work properly if the sensor is exposed to strong sunshine.
If the remote control doesn’t work properly, please check the batteries.
Bekijk gratis de handleiding van Ibiza Sound SCAN2000RGB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ibiza Sound |
| Model | SCAN2000RGB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4330 MB |
