Hyundai SI885 handleiding
Handleiding
Je bekijkt pagina 27 van 44
Water hardness Ratio of tap water : distilled water
medium 2 : 1
hard 1 : 1
very hard 1 : 2
Sprinkling appliance (additional spray)
It is used for moistening fabrics and it is effective in ironing extremely creased fabrics. It is
activated by repeated pressing of additional spray button E. We do not recommend applying
additional spray for fine fabrics (e.g. silk and synthetic) as the used water may stain the
fabric.
Intensive steaming (steam shock)
Use only if the steam ironing is insufficient. In this case press intensive steaming button
F several times (Fig. 6A – ). Thus you will get additional steam except for the steam
created by standard steaming.
Warning
When you press intensive steam shocking button F several times, water may drip from the
roning plate due to excess water in the steam chamber. Do not consider this as faulty
operation.
VERTICAL SYSTEM (Verical Steam)
It is intensive vertical steaming for steaming of freely hanging textiles (such as hanging
clothes, draperies, hangings). Set the regulation wheel H to the marked area for steaming
(Fig. 2). As soon as the indication lamp G turns OFF, stretch the fabric slightly with one
hand and move the iron vertically bottom-up (Fig. 6B – ). Press the intensive steaming
button F so that you reach vertical steam hammer. Do not hold the intensive steaming
button pressed continuously and do not use it more than 5 times consecutively. Also allow
at least one minute interval before applying this burst of steam function.
WARNING
– Prevent burning of sensitive fabrics, do not close them to the iron to distance of 10 to 20 cm.
– Use the VERTICAL function only if the regulation wheel H to the ••• or maximum position.
Self-cleaning system (SELF CLEAN)
Hold the iron disconnected from power supply in your hand, turn steaming regulator D to
position (Fig. 5) and lift off cover C to open the filling container lid. Pour water into container
I using the enclosed cup O to fill half of it and close the filling hole lid (Fig. 4) by snapping it.
Keep the position of the iron for pouring water in it. Put the iron to the rest position
(Fig. 7) and set the regulation wheel H to the maximum position. Plug power cord M into
a socket. When the control light G switch off, disconnect the iron from the electric power.
Hold the iron in the horizontal position over a sink.
Set the regulation wheel H to the marked
area for self-cleaning.
Then wait till (about 1 minute) water stops going out from the ironing
plate. If the iron still contains a lot of impurities, repeat the procedure while pushing the
intensive steaming button between individual pushing of the SELF-CLEAN button. After
completing the cleaning, plug the iron into the electric power, set the selected temperature
and then iron a clean piece of cotton cloth so that the ironing plate is cleaned.
Clean the
ironing plate using the SELF CLEAN function continuously (about twice a month).
EN - 27
EN
Bekijk gratis de handleiding van Hyundai SI885, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hyundai |
| Model | SI885 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4230 MB |
