Hyundai HYSH2800E handleiding
Handleiding
Je bekijkt pagina 20 van 38
Assembly
www.hyundaipowerproducts.co.uk
20
STEP 2: Attaching The Wheel Assembly To The Main Unit
NOTE: This step requires a Phillips screwdriver (included with the box contents of this
product).
NOTE: Both of the bracket housings located on the main unit will be fitted with a
Phillips screw. Both screws will need to be loosened in order to fit the brackets into
the main unit.
1. Carefully turn the main unit of the shredder upside-down and gently place it on
a smooth and flat surface.
2. Slide the left and right brackets into the designated slots located in the main unit
(as pictured below).
3. Re-tighten the screws with a Philllps screwdriver in both of the bracket housings
to secure the wheel assembly in place.
4. Once assembled, the protective rubber mouldings located at the end of both
brackets should be facing outwards from the main unit.
1.
2.
3. 4.
Bekijk gratis de handleiding van Hyundai HYSH2800E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hyundai |
| Model | HYSH2800E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5466 MB |
