Hymer BMC-T (2023) handleiding
Handleiding
Je bekijkt pagina 59 van 286
During the journey 4
B-MC I/T - 01/23-1 - EHG-0016-03EN 59
Fig. 36 Rocker switch (camera mo-
dule/waste water tank
camera)
Fig. 37 Display of the waste water
tank camera (example)
◼ Press the upper part of the rocker switch (Fig. 36). When reversing, the
display will show the immediate area behind the vehicle.
◼ Switch rocker switch (Fig. 36) to the central position. When driving for-
ward, the display will show the long-distance area behind the vehicle.
When reversing, the immediate area behind the vehicle will be displayed
automatically.
◼ Press the lower part of the rocker switch (Fig. 36). The display shows
the area of the waste water tank outlet (Fig. 37) underneath the vehicle.
4.19 Bonnet
When the bonnet is open, there is a risk of injury in the engine com-
partment.
Even if the engine was switched off some time ago, it might still be
hot. Danger of burns!
Do not work in the engine compartment while the engine is running.
The bonnet must be kept firmly closed and locked during the journey.
After closing, check whether the lock has engaged. In order to carry
this out, pull on the bonnet.
Fig. 38 Release lever for the bonnet
Fig. 39 Correct holding position for o-
pening the bonnet
◼ Pull release lever (Fig. 38) on the left side underneath the dashboard.
The bonnet is unlocked.
◼ Place both hands at the centre of the top and bottom edge of the bonnet
(Fig. 39).
Switching on reversing
camera:
Switching on rear view
mirror camera:
Switching on waste water
tank camera:
Opening:
Bekijk gratis de handleiding van Hymer BMC-T (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | BMC-T (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31425 MB |
