Hymer BMC-T (2023) handleiding
Handleiding
Je bekijkt pagina 145 van 286
Electrical system 8
B-MC I/T - 01/23-1 - EHG-0016-03EN 145
When leaving the vehicle, switch off the main 12 V power supply at the
rotary knob. This prevents any unnecessary discharge of the living area
battery.
Appliances, such as control units (e.g. solar charge regulator, defroster
or panel) or fitted appliances (e.g. heater, refrigerator or step) continue
to take power from the battery capacity, even if the 12 V power supply
on the panel is switched off. Therefore disconnect the living area battery
from the 12 V power supply via the switch on the transformer/rectifier if
the vehicle will not be used for a long period of time.
8.8.2 Battery voltage display
The panel shows the battery voltage of the entire battery system. If the
vehicle has a HYMER Smart Battery System (special equipment), a
further display panel is installed. You can read the exact voltage values
on this additional display panel.
The battery voltage will be displayed for approx. 20 seconds after it has
been called up.
Use the rotary knob (Fig. 144,5) for reading the voltage of the living area
battery as well as that of the starter battery. The voltage is displayed on the
indicator scale for battery voltage (Fig. 144,1).
◼ Turn the rotary knob (Fig. 144,5) until the symbol for the desired battery
lights up.
Symbol
Signification
Living area battery voltage is displayed (Fig. 144,9)
Starter battery voltage is displayed (Fig. 144,6)
◼ Read the voltage from the indicator scale for battery voltage
(Fig. 144,1).
Displays:
Bekijk gratis de handleiding van Hymer BMC-T (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | BMC-T (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31425 MB |
