Hymer BMC-T (2023) handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286/ 286

Afdrukken

Je bekijkt pagina 137 van 286

Electrical system 8

B-MC I/T - 01/23-1 - EHG-0016-03EN 137

8.5.1 Display panel

Voltage and charge data of the battery system are displayed on an external

display panel.

The display panel is installed inside the vehicle (for example in a wall-moun-

ted cupboard).

1 Indicator "Charge"

2 Display of state of charge (SoC) as

a percentage

3 Button On/Off, call up menu

4 Button Back on display

5 Button Next on display

6 Display of state of charge (SoC) as

a bar chart

7 Switching state display (not active)

Fig. 140 Display panel (display of

state of charge)

The display panel is designed such that it is energy saving. A complete shut-

down is not necessary.

The basic settings implemented by HYMER are preserved in case of power

supply failure.

When pressing one of the panel buttons, the display backlight is switched on

automatically. If no button is pressed for 3 minutes, the backlight is switched

off again automatically. The display backlight can be switched off manually

by pressing the button (Fig. 140,3).

The display shows the state of charge of the lead battery and the lithium bat-

tery (SoC). The value of the SoC is displayed as a percentage (Fig. 140,2)

and, additionally, as a bar chart (Fig. 140,6).

◼ Switch on the display backlight by pressing any button.

◼ If the display is showing the voltage indicator: press button (Fig. 140,4)

or button (Fig. 140,5) briefly to go to the display of the SoC (Fig. 140,2).

When SoC value drops below 20 %, the indicator "Charge" (Fig. 140,1)

starts flashing. In this case, recharge the batteries.

Position

Switching on/off

Display backlight

Displaying state of charge

(SoC)

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286/ 286

Bekijk gratis de handleiding van Hymer BMC-T (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Hymer (Niet gecategoriseerd)

Handleiding bekijken

Hymer Exsis I (2025)

Niet gecategoriseerd - handleiding

Handleiding bekijken

Hymer B-ML I (2025)

Niet gecategoriseerd - handleiding

Handleiding bekijken

Hymer B-MC I (2022)

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd