Hymer BMC-T (2023) handleiding
Handleiding
Je bekijkt pagina 119 van 286
Gas system 7
B-MC I/T - 01/23-1 - EHG-0016-03EN 119
7.4 External gas connection
If the external gas connection is not in use, always close the gas isola-
tor tap.
Only gas appliances with a suitable adapter should be connected to
the external gas connection.
Connect only external gas appliances which are designed for an ope-
ration pressure of 30 mbar.
Once you have made the connection and opened the gas isolator tap,
make sure that no gas is escaping at the connection point. If there is a
leak in the external gas connection, gas will escape into the open air.
Immediately close the gas isolator tap and the regulator tap on the
gas bottle. Have the external gas connection checked by an authori-
sed specialist workshop.
When connecting an external gas appliance, make sure that there is
nothing near the external gas connection that could cause a spark.
Only connect a gas appliance to the external gas connection. Do not
use the external gas connection as supply (connection of an additional
gas bottle).
Do not use the external gas connection to fill gas bottles. Observe the
information stickers on the external gas connection.
Fig. 128 External gas connection
(gas isolator tap closed)
The external gas connection is located at the rear or to the left or right of the
vehicle depending on the model.
◼ Connect the external gas device to the connection point (Fig. 128,1).
◼ Open the gas isolator tap (Fig. 128,2).
Bekijk gratis de handleiding van Hymer BMC-T (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | BMC-T (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31425 MB |
