Husqvarna-Viking Huskystar 215 handleiding
Handleiding
Je bekijkt pagina 28 van 40
26
1. With the buttonhole foot raised, hook
the cord on the small fi nger at the back
of the buttonhole foot.
fi nger
2. Bring the ends of the cord toward you
and under the buttonhole foot. Lay
them in the groove under the center of
the foot.
3. Hook the fi ller cord into the forks on
the front of the foot to hold them tight.
4. Lower the needle into the garment
where the buttonhole will start and
lower the foot.
5. Depress the foot control gently and
sew the buttonhole.
Each side of the buttonhole and the
bartacks will be sewn over the cord.
6. Remove the fabric from the machine
and cut the sewing threads.
7. Pull the left end of the fi ller cord to
tighten it.
8. Thread the end through a darning
needle, draw to the other side of the
fabric and cut.
Corded Buttonhole
Stitch selector: BH Stitch length: (0.5 - 1)
Stitch width: 5 (for Model 215)
Presser foot: Sliding buttonhole foot Thread tension: 3 - 5
1/2
3
4
5
6
7
8
1
4
2
3
0
1
2
3
4
8
1
NOTE: To cut the buttonhole opening, refer to the
instructions on page 25.
1
2
3
4
5
1
2
3
4
5
1
1
1
2
3
4
5
0
Bekijk gratis de handleiding van Husqvarna-Viking Huskystar 215, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Husqvarna-Viking |
| Model | Huskystar 215 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 5178 MB |
