Husqvarna-Viking Huskystar 215 handleiding

Naaimachine

Husqvarna-Viking

40 pagina's

PDF beschikbaar

Handleiding

1 Carefully mark the buttonhole length on

the fabric.

Place the fabric under the foot with the

buttonhole marking running toward you.

2 Move the slider (A) toward you so that

the top mark (C) on the slider meets the

start mark (B). Line up the markings on

the foot with the top mark on the fabric.

Lower the presser foot.

NOTE: The markings on the slider are engraved in

centimeters.

3 Set the stitch selector at .

Sew forward until you reach the front

marking of your buttonhole.

Stop sewing with needle up and to left

side.

4 Set the stitch selector at .

Sew four (4) to six (6) stitches.

Stop sewing with needle up and to right.

5 Set the stitch selector at .

Sew until you reach the back marking of

the buttonhole.

Stop sewing with needle up and to right.

6 Set the stitch selector at .

Sew four (4) to six (6) stitches.

Stop sewing with needle up and to left.

7 When buttonhole sewing is completed,

remove the fabric and place a pin on

the rear side of the bartack position to

prevent accidentally cutting the end of

the buttonhole stitch. Carefully cut the

opening with the seam ripper.

1 2

(A)

(B)

(C)

Bekijk gratis de handleiding van Husqvarna-Viking Huskystar 215, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.