Husqvarna-Viking Designer Ruby Royale handleiding

Naaimachine

Husqvarna-Viking

134 pagina's

PDF beschikbaar

Handleiding

3:13SettingS & functionS

Needle Stop Up/Down

(Trim Position)

Speed - and +

STOP

(Monochrome)

FIX

(Baste)

Reverse

Start/Stop

Selective Thread Cutter

Sensor Foot Down and Pivot

Sensor Foot Up and Extra Lift

SPEED - AND +

All stitches in your machine and each hoop size have a pre-

set, recommended sewing/embroidery speed.

Press Speed - or Speed + to increase or decrease the

maximum allowed sewing/embroidery speed. When not

sewing/embroidering, press Speed and a pop-up message

on the screen will indicate the speed setting. You can set the

speed by pressing the slider in the pop-up message. If you

change the speed setting while sewing/embroidering no

pop-up message will appear.

When sewing with metallic threads, or when sewing on

delicate fabrics, lower the speed for optimal results.

STOP (MONOCHROME)

Sewing Mode

Select STOP to conclude a stitch. Your machine xes the

thread and stops automatically when one stitch or stitch

program has been completed. When STOP is selected only

one stitch is displayed on the Large Interactive Screen.

The STOP button lights up when you press it. Select

STOP again to cancel or by selecting a new stitch. The

STOP button light will go out. The STOP function can be

programmed, see program chapter. The STOP function is

cancelled when the stitch is completed.

Embroidery Stitch-Out

Select STOP to eliminate stops for color changes and

create monochrome embroidery, see Embroidery Stitch-

Out chapter.

FUNCTION BUTTONS (Embroidery Mode functions are in brackets)

FIX (BASTE)

Sewing Mode

FIX is used to tie off a stitch. FIX is automatically activated

when you select a stitch, use the Selective Thread Cutter,

select Stitch Re-Start, STOP or by pressing FIX while you

are sewing. At the beginning, your machine sews a few tie-

off stitches and continues with the selected stitch. Press FIX

while sewing and your machine sews a few tie-off stitches and

stops automatically. The FIX button lights up when the FIX

function is active. Press the lit FIX button to turn it off. The

FIX function can be programmed, see Program chapter.

Note: FIX Auto can be cancelled in the SET Menu, Sewing Settings

(see page 3:7). No tie-off stitches will be sewn unless you select the

FIX button on your machine.

Embroidery Stitch-Out

Press FIX to baste an outline of the embroidery design

area or to baste the fabric to the stabilizer.

START/STOP

Press this button to start and stop the machine sewing

or embroidering without using the foot control. Press

START/STOP to begin and press again to stop.

REVERSE

For permanent reverse, press the Reverse button once

before starting to sew. The reverse indicator will be lit and

the machine sews in reverse until you press the button

again to cancel. If you press the reverse button while

sewing, the machine will sew in reverse for as long as you

keep the button pressed. The reverse indicator is lit when

the reverse button is pressed.

Reverse is also used when sewing buttonholes, darning

stitches and tapering stitches to step between the parts of

the stitch.

Reverse has no function in Embroidery Mode.

Bekijk gratis de handleiding van Husqvarna-Viking Designer Ruby Royale, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.