Husqvarna-Viking Designer Ruby Royale Handleiding (134 Pagina's)

Handleiding

GettinG to know your machine 1:11

Edging Foot J

This foot is used for overcasting and seam/overcasting, with stitches that have a stitch width

of 5.0mm or wider. Stitches form over the pin which prevents puckering at the edge of the

fabric.

Quilter’s 1/4” Piecing foot P

This foot is used when piecing quilt blocks. The foot has distance guideline marks 1/4"

(6mm) and 1/8" (3mm) from the needle.

Embroidery/Darning Foot R

This foot is used for free motion embroidery/quilting/stitching and hoop embroidery.

7

Side Motion Foot S

This foot is used for side-motion/Omnimotion stitches.

7

Decorative Stitch Foot B Transparent

A clear foot for decorative sewing makes it easy to match stitches. Same tunnel on the

underside as Presser Foot B.

7

Sensor One-Step Buttonhole Foot

Plug into the machine then enter the desired buttonhole length to sew Sensor One-Step

Buttonholes. The middle mark measures a 5/8" (15mm) from fabric edge.

Self-Adhesive Glide Plates

Used for Presser Foot C/Sensor One-Step Buttonhole Foot when sewing buttonholes on

plastic-coated fabrics, leather, etc.

Sensor Q-foot

The Sensor Q-foot is always recommended for embroidery.

This foot is also used for Free Motion sewing, quilting and embroidering on especially thick

or spongy fabric. When using the Sensor Q-foot for Free Motion, select Free Motion Spring

Action in the Free Motion Technique pop-up in Sewing Mode.

Bekijk gratis de handleiding van Husqvarna-Viking Designer Ruby Royale, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.