Husqvarna-Viking Designer Ruby Royale Handleiding (134 Pagina's)

Handleiding

1:10

PRESSER FEET

7

Utility Foot A

Snapped onto the machine upon delivery. This foot is used mainly for straight stitching and

zigzag stitching with a stitch length longer than 1.0.

7

Decorative Stitch Foot B

For sewing close zigzag stitches (satin stitches) with less than 1.0mm stitch length, other utility

stitches or decorative stitches. The tunnel on the underside of the foot is designed to feed

smoothly over the stitches.

7

Buttonhole Foot C

For manual buttonholes. This foot has guide lines to determine buttonhole length. The middle

measures a 5/8'' (15mm) from the fabric edge. The two tunnels on the underside of the foot

ensure a smooth feed over the buttonhole columns. The nger on the back of the foot holds

cording for corded buttonholes.

Blindhem Foot D

This foot is used for blindhem stitches. The inner edge of this foot guides the fabric. The right

toe of the foot is designed to ride along the hem edge.

7

Zipper Foot E

This foot can be snapped on either to the right or to the left of the needle. This makes it easy to

sew both sides of the zipper. Move needle position to right or left to sew closer to zipper teeth

or for covering large cording.

7

Non-Stick Glide Foot H

This foot, with a non-stick coating underneath, is used when sewing foam, vinyl, plastic, or

leather to keep these materials from sticking to the foot.

ACCESSORIES INCLUDED - Not in the Picture

• Complimentary Software (PC) to download

• Classic Collection to download

• Carrying Case (attached on the machine upon delivery)

• Scissors

• Foot control

• Power cord

• USB PC cable

• Needles

• Embroidery thread

• Pieces of fabric and stabilizer

• DESIGNER RUBY Royale

™

Sampler Book

• User’s Guide

• Microber cloth

Bekijk gratis de handleiding van Husqvarna-Viking Designer Ruby Royale, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.