Husqvarna Aspire P4A 18-C100 handleiding
Handleiding
Je bekijkt pagina 9 van 212
The charger can be used free-standing (for use on a desktop) or mounted on
a wall.
To mount the charger on the wall:
1. Drill 2 holes in the wall with a distance of 56 mm apart.
2.
Install 2 round-head screws with a diameter of 5–6.5
mm.(Fig. 7)
3. Attach the charger to the wall.
Troubleshooting
Symptoms Cause Solution
The red temperature monitoring indicator flashes
and the green charging indicator is on.
The charger has identified an internal error. Make sure that all batteries are fully inserted. Re-
move the mains plug and reinsert. If the error
continues, have the charger checked by an au-
thorised aftersales service centre for Husqvarna
products.
Battery is not correctly inserted. Insert the battery into the charger correctly.
The battery contacts and charging contacts are
dirty.
Clean the battery contacts and charging contacts;
e.g. by inserting and removing the battery several
times.
The battery is damaged. Replace the battery.
The red temperature monitoring indicator is on. Battery temperature is outside of the charging
range.
Wait until the battery temperature is back within
the permitted charging temperature range (0–45
°C)
2345 - 002 - 9
Bekijk gratis de handleiding van Husqvarna Aspire P4A 18-C100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Husqvarna |
| Model | Aspire P4A 18-C100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11526 MB |
