Humminbird LakeMaster Premium France V2 handleiding

Niet gecategoriseerd

Humminbird

27 pagina's

PDF beschikbaar

Handleiding

Follow the Contour

2 | Start Follow the Contour Navigation

You can start navigation if the boat position is within 1/4 mile of the selected contour.

WARNING

If the selected contour is a shoreline, set the Contour Oﬀset. See Preparation: Set the Contour Oﬀset.

Contour Oﬀset does NOT account for changes in water depth. It is important to be aware of depth variations in your current

location and adjust the Contour Oﬀset as needed.

NOTE

When the Advanced GPS Navigation is following the contour, the Current Track is not saved and iTracks cannot be recorded.

1. Tap the contour line you plan to follow.

Use the Cursor pad/Joystick to move the cursor to select a contour line.

Proceed to Step 2 to start Follow the Contour at the boat position.

2. Select Go To > Follow the Contour.

3. Select a navigation direction from the submenu.

The navigation direction is previewed in orange or purple on the Chart View.

4. Power on the trolling motor to begin navigation. Refer to the Advanced GPS Navigation operations manual for

additional information.

Starting Follow the Contour Navigation

submenu

navigation option 2

(previewed in purple)

navigation option 2 (purple)

navigation option 1 (orange)

navigation option 1

(previewed in orange)

Adjust the Contour Oset during Navigation

1. Press the GO TO key to open the Navigation menu.

2. Select Contour Offset.

3. Tap the +/- buttons, or the +/- ZOOM keys, to adjust the offset.

To remove the offset, set the offset to 0 (off).

1. Tap Adjust from the trolling motor side bar.

2. Drag the slider, or press the +/- ZOOM keys, to adjust the contour offset.

Bekijk gratis de handleiding van Humminbird LakeMaster Premium France V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.