Hughes & Kettner GrandMeister 36 handleiding

Niet gecategoriseerd

Hughes & Kettner

72 pagina's

PDF beschikbaar

Handleiding

GrandMeister 36 – Manual 1.4

7.3 Tube ratings tables

Flashes Rating Bias [V]

1 S7 10

2 S6 10.6

3 S5 11.2

4 S4 11.8

5 S3 12.4

6 S2 13

7 S1 13.6

8 0 14.2

9 1 14.8

10 2 15.4

11 3 16

12 4 16.6

13 5 17.2

14 6 17.8

15 7 18.4

16 8 19

17 9 19.6

18 10 20.2

19 11 20.8

20 12 21.4

21 * 22

22 * 22.6

23 * 23.2

24 * 23.8

25 * 24.4

8 MIDI

As you’ve learned in chapter 2.2, presets can only be changed via MIDI.

Sender (controller) receiver (amp) must use the same channel. The factory

default is MIDI channel 1 and "Omni On". If the amp does not react on

program changes properly, the MIDI channel has to be changed.

8.1 Setting MIDI channels and switching

Omni On/Off

Flip the Play/Standby switch to Standby. Now press and hold Noise Gate

and FX-Loop simultaneously for three seconds. The Store button will light

up. This assigns special programming functions to the following LEDs and

buttons:

• FX-Access: lights up to indicate GrandMeister 36 is configured to receive

incoming program changes via all MIDI channels (Omni On, default). If

the LED is not illuminated, the amp receives messages via the selected

channel only (Omni Off). To change the Omni mode, just press the FX

Access button.

• Noise Gate now serves as a +1/up button, FX Loop now serves as a -1/

down button. Use those buttons to change the MIDI channel.

• When configuring MIDI channels, the four Channel LEDs serve to

indicate the MIDI channels. Consult the table below for the MIDI channel

assignments. They show what in tech-speak is called binary code:

MIDI Channel Clean Crunch Lead Ultra

1 =

¢¢¢¢

2 =

¢¢¢{

3 =

¢¢£¢

4 =

¢¢££

5 =

¢£¢¢

6 =

¢£¢£

7 =

¢££¢

8 =

¢£££

9 =

£¢¢¢

10 =

£¢¢£

11 =

£¢£¢

12 =

£¢££

13 =

££¢¢

14 =

££¢£

15 =

£££¢

16 =

££££

Press and hold the Store button for more than three seconds to save the

settings and quit MIDI setup mode. The amp is back in normal

operating mode.

• English • Deutsch • Français • Italiano • Español

• にほんご

•

中文

Bekijk gratis de handleiding van Hughes & Kettner GrandMeister 36, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.