HP Roam for Business handleiding
Handleiding
Je bekijkt pagina 16 van 52
Enable Bluetooth Low Energy (BLE) to discover and print to HP
Roam-enabled printers
Bluetooth Low Energy (BLE) is used by the HP Roam Mobile App to discover nearby HP Roam-enabled printers.
For HP printer models that do not have embedded Bluetooth capability, install an optional accessory such as the
HP Jetdirect 3100w (3JN69A) or a Radius Networks RadBeacon (RADUSB).
NOTE: Bluetooth must be enabled on the mobile device and on the printer.
To enable the Bluetooth Low Energy (BLE) on HP printers with embedded BLE capability or by installing an
accessory, follow these steps.
Step one: Enable the Bluetooth Low Energy (BLE) feature in the EWS
To enable the Bluetooth Low Energy (BLE) on HP printers with embedded BLE capability or by installing an
accessory, follow these steps.
NOTE: This setting should remain enabled after a standard rmware update. If a partial clean or format disk is
performed on the printer, BLE support will need to be enabled again.
1. Open the EWS.
a. Open a web browser.
b. Type the printer’s IP address in the URL eld and press Enter.
2. Log in with administrator credentials.
3. Enable the Bluetooth Low Energy (BLE) feature.
● For Enterprise printers, select the Security tab, scroll down to the Bluetooth Low Energy (BLE) section,
and select Enabled from the list.
● For Pro printers, select the Network tab, select the Bluetooth Low Energy option from the left pane,
select Status, and then select Enable.
4. Click Apply.
12 Chapter 4 Setup the HP printer ENWW
Bekijk gratis de handleiding van HP Roam for Business, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Roam for Business |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6597 MB |
