HP ProDesk 2 G1a E handleiding
Handleiding
Je bekijkt pagina 45 van 125
Processor
To remove the processor, use these procedures.
Before removing the processor, follow these steps:
Table 4-11 Processor descriptions and part numbers
Description Spare part number
AMD Ryzen 7 8700G processor P05402-003
AMD Ryzen 5 PRO 8500G processor P05397-003
AMD Ryzen 5 8500G processor P05399-003
AMD Ryzen 5 8400F processor P17524-003
AMD Ryzen 3 8300G processor P05396-003
1. Prepare the computer for disassembly (see Preparation for disassembly on page 19).
2. Remove the access panel (see Access panel on page 19).
3. (UMA models only) Remove the fan duct (see Fan duct (UMA models only) on page 22).
4. Remove the heat sink (see Heat sink with fan on page 35).
Remove the processor:
1. Pull the locking lever (1) away from the processor, and then rotate the lever (2) to its fully open
position.
2. Raise and rotate the microprocessor retainer (3) to its fully open position.
3. Carefully lift the processor (4) from the socket.
IMPORTANT: Do not handle the pins in the processor socket. These pins are fragile, and handling
them could cause irreparable damage. If pins are damaged, you might have to replace the system
board.
38
Chapter 4 Removal and replacement procedures
Bekijk gratis de handleiding van HP ProDesk 2 G1a E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | ProDesk 2 G1a E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16582 MB |
