Handleiding
Je bekijkt pagina 115 van 144
Fax reports
Learn how to troubleshoot problems with fax reports.
Fax T.30 Trace Reports
Use a T.30 protocol trace report to troubleshoot fax transmission issues.
Use the following settings to specify when to print the report.
1. On the control panel Home screen, touch Menu.
2. Scroll to Utilities and touch Tools.
3. Touch Troubleshooting, and then touch Fax.
4. Touch to select any of the following options next to Fax T.30 Trace Reports to print.
● Never Automatically Print
● Print after every fax
● Print only after sending faxes
● Print only after receiving faxes
● Print only after problems sending faxes
● Print only after problems receiving faxes
● Print after any fax problems
Fax test report
Print fax test report to test fax setup using the printer control panel.
NOTE: Make sure the cartridges are installed, and that full-size paper is loaded in the input tray, before
starting the test.
1. Set up the printer for faxing according to your home or oice setup instructions.
2. On the control panel Home screen, touch Menu.
3. Scroll to Utilities and touch Tools.
4. Touch Troubleshooting, and then touch Fax.
5. Touch Fax Test Report to print.
The printer prints the test report.
6. Review the report.
● If the test passes and you are still having problems faxing, check the fax settings listed in the report to
verify the settings are correct. A blank or incorrect fax settings might cause problems faxing.
See Change fax settings.
● If the test fails, review the report for more information on how to x any problems found.
Fax reports
107
Bekijk gratis de handleiding van HP OfficeJet Pro 9135e, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | OfficeJet Pro 9135e |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 20406 MB |
