Handleiding
Je bekijkt pagina 67 van 139
Table 7-5 Rear view of printer (continued)
Feature Description
3
Use a minimum 26 AWG phone cord to connect to the port on the printer.
CAUTION: To reduce the risk of re, use only No. 26 AWG or larger (For example, 24 AWG) UL Listed
or CSA Certied Telecommunications Line Cord.
You might need to connect the phone cord to your country/region adapter.
Set up the printer with DSL
Follow these steps to set up the printer with DSL.
1. Obtain a DSL lter from your DSL provider.
2. Connect one end of the phone cord to your telephone wall jack, then connect the other end to the Fax
port on the back of the printer.
NOTE: You might need to connect the phone cord to your country/region adapter.
Get additional phone cords for this setup if needed. You can purchase phone cords from electronics stores
that sell phone accessories.
3. Connect an additional phone cord from the DSL lter to the telephone wall jack.
If you encounter problems setting up the printer with optional equipment, contact your local service provider or
vendor for further assistance.
Case C: Set up the printer with aPBX phone system or an ISDN line
If you are using either aPBX phone system or an ISDN converter/terminal adaptor, make sure you do the
following:
● If you are using either aPBX or an ISDN converter/terminal adaptor, connect the printer to the port that is
designated for fax and phone use. Also, make sure that the terminal adaptor is set to the correct switch type
for your country/region, if possible.
NOTE: Some ISDN systems allow you to congure the ports for specic phone equipment. For example,
you might have assigned one port for telephone and Group 3 fax and another port for multiple purposes. If
you have problems when connected to the fax/phone port of your ISDN converter, try using the port
designated for multiple purposes; it might be labeled "multi-combi" or something similar.
● If you are using aPBX phone system, set the call waiting tone to "o."
NOTE: Many digital PBX systems include acall-waiting tone that is set to "on" by default. The call waiting
tone interferes with any fax transmission, and you cannot send or receive faxes with the printer. Refer to
the documentation that came with your PBX phone system for instructions on how to turn o the call-
waiting tone.
● If you are using aPBX phone system, dial the number for an outside line before dialing the fax number.
● You might need to connect the phone cord to your country/region adapter.
If you encounter problems setting up the printer with optional equipment, contact your local service provider or
vendor for further assistance.
Set up the printer with DSL
59
Bekijk gratis de handleiding van HP OfficeJet Pro 9125e, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | OfficeJet Pro 9125e |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 18739 MB |
