Handleiding
Je bekijkt pagina 66 van 139
Set up the printer with a separate fax line
Follow these steps to set up the printer with a separate fax line.
1. Connect one end of the phone cord to your telephone wall jack, then connect the other end to the Fax
port on the back of the printer.
NOTE: You might need to connect the phone cord to your country/region adapter.
2. On the control panel Home screen, touch Menu.
3. Scroll to Utilities and touch Settings.
4. Touch Fax Receive, and then touch Fax Receive Settings.
5. Touch the toggle button next to Auto Answer to turn it on or o.
6. (Optional) Set Rings to Answer to the lowest setting (two rings).
When the phone rings, the printer answers automatically after the number of rings you set in the Rings to
Answer setting. The printer begins emitting fax reception tones to the sending fax machine and receives the fax.
Case B: Set up the printer with DSL
If you have aDSL service through your telephone company, and do not connect any equipment to the printer, use
the instructions in this section to connect aDSL lter between the telephone wall jack and the printer. The DSL
lter removes the digital signal that can interfere with the printer, so the printer can communicate correctly with
the phone line (DSL might be called ADSL in your country/region).
NOTE: If you have aDSL line and you do not connect the DSL lter, you cannot send and receive faxes with the
printer.
Table 7-5
Rear view of printer
Feature Description
1 Telephone wall jack.
2 DSL (or ADSL) lter and cord supplied by your DSL provider.
58 Chapter 7Fax
Bekijk gratis de handleiding van HP OfficeJet Pro 9125e, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | OfficeJet Pro 9125e |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 18739 MB |
