Handleiding
Je bekijkt pagina 32 van 91
Media and tray l 32
Labels
To avoid damaging the machine, use only labels designed for use in laser printers.
• When selecting labels, consider the following factors:
－ Adhesives: Should be stable at your machine’s fusing temperature about 170°C (338°F).
－ Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that
have spaces between the labels, causing serious jams.
－ Curl: Must lie flat with no more than 13 mm of curl in any direction.
－ Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.
• Make sure that there is no exposed adhesive material between labels. Exposed areas can cause
labels
to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to
machine components.
• Do not run a sheet of labels through the machine more than once. The adhesive backing is
designed for
only a single pass through the machine.
• Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or
otherwise
damaged.
Card stock/Custom-sized paper
• In the software application, set the margins to at least 6.4 mm (0.25 inches) away from the edges of the
material.
Bekijk gratis de handleiding van HP Laser 30000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Laser 30000 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 8149 MB |
