HP Elite Mini 805 G8 handleiding
Handleiding
Je bekijkt pagina 32 van 117
1. Prepare the computer for disassembly (see Preparation for disassembly on page 19).
2. Remove the access panel (see Access panel on page 19).
Remove the fan:
1. Lift the fan (1) up to about 45°, and then remove the cable from its routing around the heat sink
screw post (2).
2. Disconnect the fan cable from the system board connector (3).
3. Lift the fan (4) out of the computer.
NOTE: Computer appearance can vary.
To install the fan, reverse the removal procedure.
Flex I/O connector board
To remove the flex I/O connector board, use these procedures.
Table 4-5
Flex I/O connector board descriptions and part numbers
Description Spare part number
USB Type-C port M11564-001
Serial port M11559-001
USB Type-A ports (2) M11562-001
Fiber NIC, 2.5G M74416-001
Before removing the flex I/O connector board, follow these steps:
Flex I/O connector board
25
Bekijk gratis de handleiding van HP Elite Mini 805 G8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Elite Mini 805 G8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12688 MB |
