Handleiding
Je bekijkt pagina 44 van 78
HP Designjet 30/90/130 Printer series – Quick Reference Guide
43
English
The Problem is a Sheet of Paper is Jammed (30 Printer series)
1. Press the OK key (the upper right key) on the printer’s front panel.
If this does not solve the problem…
2. Turn off the printer.
3. Remove all paper from the tray. Pull out any paper that is visibly stuck.
4. Lift the top cover and pull out any paper that may be stuck. Be careful
when you lift the cover not to damage or disturb any of the tubes or other
internal parts of the printer.
5. Remove the rear path carefully by pressing the buttons on each of its sides
and pulling it straight out. If you don’t pull it straight out, you may damage
the paper sensor.
Removing the rear path gives access to the inside of the printer from the
rear.
Pull out paper that may be stuck inside or which is accessible from the rear.
Replace the rear path and make sure it fits securely.
6. Turn on the printer. If there is a degradation in print quality after you have
cleared the paper jam, clean and align the printheads. Refer to “How Do I
Align Printheads?” on page 35.
Rear path
Bekijk gratis de handleiding van HP Designjet 90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Designjet 90 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 10948 MB |
