Handleiding
Je bekijkt pagina 43 van 78
HP Designjet 30/90/130 Printer series – Quick Reference Guide
42
English
The Problem is the Input Tray Will Not Fit Properly
If you have problems inserting the input tray securely, try inserting and removing
the tray two or three times. Normally this should resolve the problem. If not,
check that the latches are correctly positioned.
Note that the illustration below shows the HP Designjet 90&130 Printer series.
Inside the slot where the tray goes, there are three spring-loaded latches. If they
are not in the correct position, the tray does not fit properly.
Make sure that both latches are forward. If necessary, pull them towards you.
When you insert the tray, you should hear a click as the latches are pushed
back; when you remove the tray, the latches click as they move forward.
Bekijk gratis de handleiding van HP Designjet 90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Designjet 90 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 10948 MB |
