Handleiding
Je bekijkt pagina 25 van 36
creating a new media profile
hp designjet 815mfp & scanner 4200 21
creating a new media profile
Before starting the following procedure, make sure you have
color-calibrated the scanner, and make sure that the media
profile you intend to create is not there in the list already.
a - Press the Setup tab.
b - Press the Printer button. If necessary, press the Tool
button.
c - Press the Add Media Profile button.
d - Press the Calibrate RIP button.
e - Set the ink level and the gray balance, then press OK
to return to the Media Setup menu.
f - Press the Print Color Sheet button to print a color patch
reference sheet.
g - Load the color sheet into the scanner face down,
aligning the arrow to the 10.5-inch mark (26.7 cm)
measured from the right side of the scanner.
h - Press the Name and Scan Sheet button to assign a
name to your new media profile.
i - Press the Enter key to accept the new name and begin
scanning the color sheet.
The media profile is now in the list of available media profiles.
You can use the Delete button to delete media profiles. Only
user-created profiles can be deleted.
You can use the Rename button to rename media profiles if
needed.
You can use the Validate button to check that the media profile
is valid for your combination of scanner and printer.
quickref.book Page 21 Wednesday, February 12, 2003 2:01 PM
Bekijk gratis de handleiding van HP DesignJet 815mfp, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | DesignJet 815mfp |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 3187 MB |
Caratteristiche Prodotto
| Gewicht | 180000 g |
| Gewicht verpakking | 255000 g |
| Stroomvoorziening | 100 - 240 V (± 10%), 50/60 Hz, max. 8 A |
| Kleur | Nee |
| Frequentie van processor | 850 MHz |
