Handleiding
Je bekijkt pagina 30 van 57
HP Designjet 70/110plus Printer series—Quick Reference Guide
29
• Push the printhead gently into place, so that it is secure.
Repeat this for each printhead that is to be replaced.
5. When you have replaced the printheads as required, pull the printhead cover
towards you, ensuring that the hook at its front edge latches onto the tab, and
then push it away from you to close the cover.
6. Finally close the rear part and then the front part of the outer flap. Note that
after closing the flap, the printer will automatically perform some internal
calibrations on the printhead, and then on the alignment. There must be paper
in the tray during alignment (you can use your least expensive paper). Pre-
alignment calibrations may take some time, especially if multiple printheads
are replaced.
How do I replace printheads? (continued)
Bekijk gratis de handleiding van HP DesignJet 70, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | DesignJet 70 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 10826 MB |
Caratteristiche Prodotto
| Kleur van het product | Zilver |
| Gewicht | 18500 g |
| Breedte | 17000 mm |
| Diepte | 670 mm |
| Hoogte | 225 mm |
