HP Color Laserjet Enterprise Flow MFP M681z Handleiding (264 Pagina's)

Handleiding

/ 264

Je bekijkt pagina 251 van 264

Solve wired network problems

Introduction

Certain types of problems can indicate there is a network communication problem. These problems include the

following issues:

●

The periodic loss of ability to communicate with the printer

●

The printer cannot be found during driver installation

●

A periodic failure to print

Check the following items to verify that the printer is communicating with the network. Before beginning, print a

conguration page from the printer control panel and locate the printer IP address that is listed on this page.

●

Poor physical connection

●

The computer is using the incorrect IP address for the printer

●

The computer is unable to communicate with the printer

●

The printer is using incorrect link and duplex settings for the network

●

New software programs might be causing compatibility problems

●

The computer or workstation might be set up incorrectly

●

The printer is disabled, or other network settings are incorrect

NOTE: HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating

systems and not of the HP print drivers. For more information, go to Microsoft at www.microsoft.com.

Poor physical connection

1. Verify that the printer is attached to the correct network port using a cable of the correct length.

2. Verify that cable connections are secure.

3. Look at the network port connection on the back of the printer, and verify that the amber activity light

ashes indicating network trac, and the green link-status light is continuously lit indicating a network link.

4. If the problem continues, try a dierent cable or port on the hub.

The computer is using the incorrect IP address for the printer

1. Open the printer properties and click the Ports tab. Verify that the current IP address for the printer is

selected. The printer IP address is listed on the printer conguration page.

2. If you installed the printer using the HP standard TCP/IP port, select the box labeled Always print to this

printer, even if its IP address changes.

3. If you installed the printer using a Microsoft standard TCP/IP port, use the hostname instead of the IP

address.

4. If the IP address is correct, delete the printer and then add it again.

ENWW Solve wired network problems 237

/ 264

Bekijk gratis de handleiding van HP Color Laserjet Enterprise Flow MFP M681z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.