HP Color Laserjet Enterprise Flow MFP M681z Handleiding (264 Pagina's)

Handleiding

/ 264

Je bekijkt pagina 119 van 264

NOTE: To nd the Windows domain in Windows 7, click Start, click Control Panel, click System.

To nd the Windows domain in Windows 8, click Search, enter System in the search box, and

then click System.

The domain is listed under Computer name, domain, and workgroup settings.

NOTE: If a shared folder is set to be accessed by everyone, values for a workgroup name

(default is “Workgroup”), a user name and password must be entered in the corresponding

elds. However, if the folder is within a particular user’s folders and not Public, the user name

and password of that user must be used.

NOTE: An IP address might be necessary instead of a computer name. Many home routers do

not handle computer names well, and there is no Domain Name Server (DNS). In this case, it is

best to set up a static IP address on the shared PC to alleviate the problem of DHCP assigning a

new IP address. On a typical home router, this is done by setting a static IP address that is on

the same subnet, but outside the DHCP address range.

7. Click OK.

●

Option two: Save to an FTP Server

NOTE: If an FTP site is outside the

rewall, a proxy server must be specied under the network

settings These settings are located in the EWS Networking tab, under the Advanced options.

1. Select Save to an FTP Server.

2. In the FTP Server

eld, type the FTP server name or IP address.

3. In the Port

eld, type the port number.

NOTE: In most cases, the default port number does not need to be changed.

ENWW Set up Scan to Network Folder 105

/ 264

Bekijk gratis de handleiding van HP Color Laserjet Enterprise Flow MFP M681z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.